德國ESD通訊模塊國內總代理                                             德國esd electronic system design通信卡CAN-CBM-DP特惠銷(xiāo)售
德國esd 通訊模塊參數
781071-60    緩沖墊    Schwingungsdaempfer Dresden
741020-70    緩沖墊    Schwingungsdaempfer Dresden
CANopen-DP,Art.-Nr.C.2908.02    通訊模塊    esd electronic system design gmbh
CAN-CBM-DP，No.C.2844.03    通訊模塊    esd electronic system design gmbh
CAN-CBM-BRIDGE，No.C.2842.03    通訊模塊    esd electronic system design gmbh
Produkte Zertifikat    證書(shū)    esd electronic system design gmbh
CAN-CBM-DP，No.C.2844.03    通訊模塊    esd electronic system design gmbh
CAN-CBM-BRIDGE，No.C.2842.03    通訊模塊    esd electronic system design gmbh
CAN-PCI/200-1    通信卡    esd electronic system design gmbh
CAN-PCI/200-1    通訊模塊    esd electronic system design gmbh
CAN-CBM-DP，No.C.2844.03    模塊    esd electronic system design gmbh
CAN-CBM-DP(SN:HZ9648)    模塊    ESD
CAN-PCI/331 No. C.2020.04    接口模塊    ESD
HDM-CAN-SLAVE-PROFIL,CAN-CBM-DP-1M-IST,NR.105754    總線(xiàn)模塊    ESD
CAN-CBM-DP，No.C.2844.03    通訊模塊    esd electronic system design gmbh
CAN-PCI/200-1    通訊模塊    esd electronic system design gmbh
德國ESD通訊模塊國內總代理
德國ESD通訊模塊規格型號
CAN-CBX-THERMO
CANopen Module with 4 Thermocouple Interfaces
High Resolution Temperature Measurement
4 high resolution and accuracy thermocouple inputs
Support of J, K, B, E, N, R, S and T thermocouples
Automatic cold junction compensation
CANopen profiles acc. to CiA specification CiA 301 and CiA 404
Approved Reliability and Ease of Use
Electrical isolation of thermocouple interfaces: all channels are electrically isolated against the microcontroller circuits and against each other
InRailBus technology combines high ease of use and proven reliability
DIN-EN carrier rail mounting (TS 35)
Setup Options of Thermocouple Interfaces
Offset/Gain can be adjusted by the user
Voltage-only measurement also available
CAN-EtherCAT
EtherCAT-CAN Gateway
Seamless Connection between EtherCAT and CAN
High-speed CAN interface (ISO 11898-2)
100BASE-TX EtherCAT interface (IEEE 802.3)
User-Friendly Configuration
Configuration via EtherCAT master and standard EtherCAT configuration tools
EtherCAT slave functionality according to ETG Modular Device Profile No. 5000
EtherCAT Network Extension
Ethernet-over-EtherCAT (EoE) support to connect Ethernet devices to EtherCAT
Firmware upgradable
CAN-PCIe/402
PCI Express Board with up to 4 CAN Interfaces
Single Lane PCIe Board with Altera FPGA for up to 4x CAN
1x, 2x or 4x CAN interfaces according to ISO 11898-2
Bus mastering and local data management by FPGA
PCIe interface according to PCI Express Specification R1.0a
Supports MSI (Message Signaled Interrupts)
Selectable CAN termination on board
Wide Range of Operating System Support and advanced CAN Diagnostic
Drivers and higher layer protocols for Windows, Linux, VxWorks, QNX, RTX, RTX64 and others
CANopen, J1939 and ARINC 825 protocols available
esd Advanced CAN Core (esdACC) technology
Variety of Product Designs
Product versions available with or without electrical isolation
Low profile version for 1x CAN or 2x CAN
4x CAN via 1x DSUB37 connector (adapter cable available as an option)
ECX-EC
EtherCAT Slave Bridge
"Bridging" two EtherCAT Slave Segments
Includes two EtherCAT slave devices
Process data exchange between two EtherCAT networks
Time synchronization (DC) between the EtherCAT Masters
Supports DC with redundancy
EtherCAT Implementation
Ethernet physics acc. to IEEE 802.3
Configuration via CoE
Firmware upgradeable via FoE
EoE support (Switch port)
EtherCAT Process Image widely configurable
Configuration by typical network configuration tools (e.g. esd Workbench, TwinCAT?)
Up to 1024 bytes in each direction
Layout defined by variables, e.g. 'UDINT'
CAN-USB/2
CAN USB 2.0 Interface
CAN Network at USB 2.0 High-Speed
USB 2.0 high-speed interface with data rates of 480 Mbit/s
Differential CAN interface with electrical isolation, 1 Mbit/s, ISO 11898-2
Powered via USB
Microcontroller ARM 7
Time stamped CAN messages with a resolution of 1 μs
Robust Alu-Micro Case with Status LEDs
Aluminium case, dimensions 55 mm x 55 mm x 25 mm
Four LEDs show the state of the module
Incl. USB cable
Wide Range of Application
Silent mode support for analyzing tools
Full compatibility with applications written for esd's NTCAN-API
CANopen and J1939 protocol libraries are available
Firmware can be updated in the field
德國ESD通訊模塊國內總代理